Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Replacement time of enterprise safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
To completely remove the helmet from under the patient’s head, one officer must provide Manual In-Line Stabilization (MILS) by placing their hands on either side of the patient’s head, while another officer carefully slides the helmet backward and out from under the patient.
Inflating the bladder lifts the ,helmet, off of the head with little to no neck movement thereby reducing the risk of complications from ,helmet removal,. Action Sports EMS has been using the Eject ,Helmet Removal, System since 2010 and its use is explained at all of our rider ,safety, meetings.
Lower the inner shield by pushing the slider button located on the left hand side of the helmet completely forward. With the inner shield in the down position, grasp and pull straight out from the helmets eye port on each side of the inner shield to remove. You will feel the inner shield unsnap from the helmet.
Gently but with pressure slide the safety shield down the temple to the end. For snap-on shields, wiggle the top and bottom of the shield as you slide it down the temple until it loosens. Do not remove side shields that are held in place permanently with a clip, bolt or pin.
Three years hence remove the helmet from use or earlier if the helmet has changed in colour, exhibits any signs of wear, or damage due to impact or deterioration (AS/NZS 1800:1998 3.4). If the sticker has not been used, replace the helmet three years from the manufacture date …
The helmet must also be changed if it has suffered any significant impact regardless of signs of damage. What can I do to lengthen my helmet's shelf life - Clean the helmet regularly shell with warm water and mild detergent. Manufacturer approved solvents can be used to remove tar, paints, oils and other substances that are hard to remove.
"After riding, the best thing to do is to not put your helmet in a bag or box," Tabitha Knaub says particularly if it's fabric-lined. Instead, she advises, wipe the inside with a clean, damp cloth; then let the helmet air-dry. If you must, go ahead and store your helmet in your tack trunk or a hat bag, but only temporarily.
27/5/2008, · As long as it's on top of the top coat of lacquer, and is actually a sticker, sure. Just take it off as you would any bumper sticker. Hairdryer/heat gun, peel, and then use Goo Gone to remove the residue. Some manufacturers (I've noticed it a lot with HJC) are actually making the logo on the back of the helmet part of the design.
To remove the Body from the helmet strap, insert on object (toothpick or pencil end) between BOTH of the Body Arms and the portion of the Horseshoe that shows through the notch in the Nylon Body. This is done by pulling the Body Arm away from the side of the Body just enough to place the object between the Body Arm and the protruding Horseshoe piece.
Other ,helmets, are designed to protect against multiple moderate impacts, including football and hockey ,helmets,. However, you may still have to replace these ,helmets, after one severe impact, particularly if the ,helmet, has visible signs of damage, such as a cracked shell or a permanent dent. 5. A ,helmet, is just part of ,the safety, equation.